Capacitive Touch Slide Sensor(CY8C4014LQI) is a multifunctional touch sensor. You can touch the two buttons or slide on the 5-segment slider, each touch pad has a corresponding LED to indicate the touch status. Also we provide a default high interrupt pin, once you touch the button or slide the slider, it will comes to low.
It will be a lot fun to use this module as a game controler or apply it to other touch applications.
Features¶
- 32-bit MCU Subsystem
- 16-MHz ARM Cortex-M0 CPU
- Up to 16KB of flash with Read Accelerator
- Up to 2KB of SRAM
- Automatic hardware tuning (SmartSense™) over a sensor range of 5 pF to 45 pF
- I2C interface
Specification¶
Item | Value |
---|---|
Operating Voltage | 3.3V / 5V |
Operating Ambient Temperature | -40°C to +85°C |
Operating Junction Temperature | -40°C to +100°C |
Interface | I2C |
Default I2C Address | 0x08 |
Size | L: 60mm W: 20mm H: 6mm |
Weight | 8g |
Package size | L: 140mm W: 90mm H: 10mm |
Gross Weight | 15g |
Applications¶
- Game controller
- Touch applications
Hardware Overview¶
Pin Out¶


Schemaitc¶
Power
This module is based on CY8C4014LQI, the input voltage of this chip range from 1.71v-5.5v, so you can use both 3.3v and 5v pin of Arduino to supply for this module.